How to Paint the Exterior of a House

 walks you through the steps of painting the exterior of a house, from prep work through the finishing touches.

If you are repainting an existing home, inspect the exterior walls and trim for chipping, peeling, mildew and other imperfections. Kill off mildew by applying a chlorine bleach solution with a garden sprayer. Then pressure-clean the entire exterior to remove dirt and old paint that has come loose.

 Caulk and Patch

Before you pick up a paint roller, grab a tube of caulk. It’s vital to seal any cracks, as well as the joints where one type of exterior material meets another. This includes: window frames, door frames, molding and fascia boards.

If an old stucco surface has chips or pits, patch them with new stucco (and allow time to cure). Replace wood siding or fascia boards that show signs of rotting. Gently sand wood trim and doors to ensure an ideal surface for painting.

 Take Time to Prime

To get the most out of your paint job, prime with a quality sealer. “Sealer has high resin content,” Dan explains. “That goes over old paint, locks everything in place and creates a good surface for the new paint to adhere to.”

If you are repainting walls that have become chalky or dusty, select a chalky wall sealer. Paint will not stick to a dusty surface. WHY US OUR COMPANY PROUDLY SERVICES , IT’S CLIENTS AND SPECIALIZES IN CUSTOM INTERIOR AND EXTERIOR PAINTING.

As for new construction, latex primer works well for vinyl and most wood siding. If you’re working with stucco that is not fully cured, you can apply a hot stucco primer. This sidesteps the waiting period, allowing the surface to accept paint as soon as the primer dries. It’s best, however, to let stucco cure for the recommended time period if possible.

Check the label on your primer or sealer to determine how long to wait before you begin painting.westchesterpainters.net